A Transparent, Collaborative, and Success-Driven Work Environment

We currently have a Sr. Mechanical Engineer opening to support operations at our Wyomissing, PA office. The ideal candidate will be a self-starter and will lead engineering efforts in the mechanical design areas as part of a multi-office design team. This is a great opportunity for a motivated, energetic individual who wants to challenge their abilities in a dynamic work environment.

Key Responsibilities:

Assignments will have leadership and oversight of piping designers as well as interface with project managers to fulfill project requirements.

• Create and develop a project design basis, PFDs, P&IDs, and equipment layout drawings from concept through approval.
• Develop Steady State Hydraulic Modeling for liquids and gases for use in pipe sizing and pump selection.
• Develop specifications, data sheets, drawing requirements for a complete RFQ package, approve vendor supplied drawings and data for equipment packages including pumps, compressors, meter skids, pressure vessels, tanks, pig traps, control valves and motor operated valves. Develop Technical bid evaluations and make recommendations on specific equipment and components.
• Coordinate with pipe designers and other disciplined designers in the development of project 3D models as well as interdisciplinary reviews.
• Review and selection of piping specifications.
• Participate in HAZOP/PHA reviews, client drawing and designs reviews in accordance with industry codes and Company policies. Code of Federal Register (CFR), Parts 192 and 195 as well as B31.3, B31.4 and B31.8. Experience and/or certification as a facilitator is a plus.
• Development of construction scopes of work to be utilized with construction bid packages.

Capabilities and Credentials:

• Bachelor’s degree in mechanical engineering.
• Registered Engineer (P.E.) is preferred or the ability to obtain a license.
• Minimum of 5 years’ relevant experience supporting oil & gas projects is preferred.
• Experience creating PFDs and P&IDs is required.
• Knowledge of the Code of Federal Register (CFR), Parts 192 and 195 as well as ASME B31.3, B31.4 and B31.8
• HAZOP/PHA experience and/or certification as a facilitator is a plus.
• Knowledge of pipeline surge analysis, Stoner or Pipesim is a plus.
• The ability to work on two or more interdisciplinary projects at once while effectively managing time and prioritizing project deliverables.
• Excellent written, verbal, and organizational skills.
• Travel to job sites up to 10% of the time.

We currently have a Senior Mechanical Engineer (MEP) opening to support operations at our Wyomissing, PA office. The ideal candidate will be a self-starter and will lead engineering efforts in the mechanical design areas as part of a multi-office design team. This is a great opportunity for a motivated, energetic individual who wants to challenge their abilities in a dynamic work environment.

Key Responsibilities:

• Assignments will have leadership and oversight of piping designers as well as interface with project managers to fulfill project requirements.
• Create and develop a project design basis, PFDs, P&IDs, and equipment layout drawings from concept through approval.
• Calculate heating and cooling loads for building systems.
• Contribute to a variety of HVAC, plumbing, process piping, fire protection, and data/telecommunication system design projects.
• Work with multi-discipline staff in designing and implementing mechanical systems in new or existing buildings and industrial facilities.
• Perform mechanical design calculations and standard computations, such as building heating and cooling.
• Follow building design and energy codes and standards (ASHRAE, IBC).
• Survey mechanical systems, equipment, and building conditions.
• Specify equipment requirements.
• Prepare technical reports and specifications.
• Coordinate with pipe designers and other disciplined designers in the development of project 3D models as well as interdisciplinary reviews.

Capabilities and Credentials:

• Bachelor’s degree in mechanical engineering.
• Registered Engineer (P.E.) is preferred or the ability to obtain a license.
• Minimum of 5 years’ relevant experience with mechanical systems in new or existing buildings and industrial facilities.
• Experience creating PFDs and P&IDs is required.
• The ability to work on two or more interdisciplinary projects at once while effectively managing time and prioritizing project deliverables.
• Excellent written, verbal, and organizational skills.
• Knowledge of AutoCAD and Revit.
• Travel to job sites up to 10% of the time.

The selected candidate should be eligible for employment in the U.S. and possess a valid driver’s license and be prepared to pass periodic drug screening and a background check.

Our Denver office is seeking a Senior-level Electrical Engineer with experience planning, organizing, and developing engineering activities for the construction and maintenance of midstream oil and gas, energy plants, and facilities. This position will actively participate in the full project cycle, from the design phase through the final construction close-out.

Key Responsibilities:

• Lead projects from start to finish.
• Plan personal daily tasks and the work of other team members.
• Manage budget and schedule for the project’s resources and deliverables.
• Participate in or lead squad check drawing package reviews.
• Be able to read, interpret, and check vendor E&I drawings and vendor catalogs.
• Travel independently to and conduct site surveys to document electrical, instrumentation, and controls at existing client sites and facilities (less than 5% of the time).

Capabilities and Credentials:

• 10-15 years of engineering design experience supporting oil and gas and heavy industrial projects.
• Four-year engineering degree from an accredited university.
• Registered Professional Engineer (by exam) or capable of obtaining a PE within 12 months.
• Extensive working knowledge and understanding of the latest version of the National Electrical Code, especially for hazardous locations.
• Working knowledge of relevant standards: UL, API, NFPA, IEEE, NEMA.
• Proficient in interfacing with 480 V and below power electrical equipment (MCC & motor controls, transformers, ASDs, etc.) and performing calculations for conduit fill, voltage drop, sizing of transformers, conductors, panelboards, breakers, etc.
• Understanding of power system studies using EasyPower, SKM, or ETAP.
• Experience with wiring diagrams, electrical interconnects, panel layouts, junction box design, PLC cabinet design, plot plans, loop diagrams, I/O lists, P&IDs, cable/conduit schedules, panelboard schedules, and electrical and instrument installation details.
• Minimal supervision of scope development and technical details.
• Proficient in MS Word & Excel in creating documents from scratch.
• Excellent interpersonal relationship skills: Ability to work with clients one-on-one.
• Good verbal and written communication skills in English.
• Excellent mentoring skills to help train less experienced designers and engineers.

Our Wyomissing office is seeking a Senior-level Electrical Engineer with experience planning, organizing, and developing engineering activities for the construction and maintenance of midstream oil and gas, energy plants, and facilities (MEP). This position will actively participate in the full project cycle, from the design phase through the final construction close-out.

Key Responsibilities:

• Lead projects from start to finish.
• Plan personal daily tasks and the work of other team members.
• Manage budget and schedule for the project’s resources and deliverables.
• Participate in or lead squad check drawing package reviews.
• Be able to read, interpret, and check vendor E&I drawings and vendor catalogs.
• Travel independently to and conduct site surveys to document electrical, instrumentation, and controls at existing client sites and facilities (less than 5% of the time).
• Design lighting, fire alarm, telecom, and security systems.

Capabilities and Credentials:

• 10-15 years of engineering design experience supporting oil and gas, heavy industrial projects, or energy plants and industrial MEP facilities projects.
• Four-year engineering degree from an accredited university.
• Registered Professional Engineer (by exam) or capable of obtaining a PE within 12 months.
• Extensive working knowledge and understanding of the latest version of the National Electrical Code (NFPA 70), especially for hazardous locations.
• Working knowledge of relevant standards: UL, API, NFPA, IEEE, NEMA, IBC, Life Safety Code.
• Proficient in interfacing with 480 V and below power electrical equipment (MCC & motor controls, transformers, ASDs, etc.) and performing calculations for conduit fill, voltage drop, sizing of transformers, conductors, panelboards, breakers, etc.
• Understanding of power system studies using EasyPower, SKM, or ETAP.
• Experience with wiring diagrams, electrical interconnects, panel layouts, junction box design, PLC cabinet design, plot plans, loop diagrams, I/O lists, P&IDs, cable/conduit schedules, panelboard schedules, and electrical and instrument installation details.
• Working knowledge of AutoCAD and Revit is a plus.
• Minimal supervision of scope development and technical details.
• Proficient in MS Word & Excel in creating documents from scratch.
• Excellent interpersonal relationship skills: Ability to work with clients one-on-one.
• Good verbal and written communication skills in English.
• Excellent mentoring skills to help train less experienced designers and engineers.

We currently have a Project Manager opening in our Wyomissing, PA; Houston, TX; and Denver, CO offices. In this position, you will have the opportunity to work as part of a team of engineers and designers on multiple projects within the critical infrastructure industry. This position will actively participate in the full project cycle, from the design phase through the final construction close-out. This is a great opportunity for a motivated, energetic individual who wants to challenge their abilities in a dynamic work environment.

Key Responsibilities: 

• Work closely with the project team and client on multidisciplinary projects. 
• Communicate effectively with project participants to provide assistance and technical support. 
• Interact with the client to interpret their needs and requirements 
• Participate in proposal development including identifying scope and manhours, participate in presentations. 
• Manage schedule, project costs, communications and manpower during project execution. 
• Review engineering designs and provide quality assurance 

Capabilities and Credentials: 

• Minimum 8-10 years of project management experience 
• Engineering degree from an accredited college program 
• Familiarity with all aspects of the project lifecycle 
• Excellent written and verbal communication skills 
• Excellent technical and project management skills related to the planning, design and construction process. 
• Ability to manage competing demands on multiple client projects simultaneously. 
• Ability to read and understand construction documents such as drawings and specifications. 
• Ability to solve problems using sound professional judgment, creativity, and innovation. 
• Ability to retain information, details, and procedures for use on future projects. 
• Ability to use Microsoft Project/Primavera P6 a plus 
• Effective written and verbal communication skills. 
• Able to work under and meet tight deadlines. 
• Punctual, dependable, detail-oriented, and thorough. • Demonstrate good character traits and rapport with colleagues. 

We currently have an opening in our Pittsburgh office for an experienced Piping Designer in our Energy division. In this position, you will have the opportunity to work as part of a team of engineers and designers on multiple projects for the Oil and Gas industry. This is a great opportunity for a motivated, energetic individual who wants to challenge their abilities in a dynamic work environment.

Key Responsibilities:

• In coordination with engineers and other designers, produce construction drawings and plan sets using computer-aided drafting programs (mainly CADWorx; knowledge of additional CAD software like Plant3D and Revit is a plus).
• Complete tasks on projects including preparing P&ID’s, piping plans, piping sections, isometrics, bill of materials, etc.
• Collaborate closely with other members of the project team, with a willingness to take on more responsibilities as your experience evolves.
• Work closely with design leads and engineers in recommending the best use of CAD tools to achieve project objectives, troubleshoot, and resolve issues with CAD tools.
• Perform thorough quality control edits (red lines) of construction documents as directed by the design team, utilizing the correct project and/or company standards.
• Assist on site visits with project/survey team.
• Demonstrate good character traits and maintain rapport with colleagues.

Capabilities and Credentials:

• Minimum of 8 years of experience.
• Technical training preferred or equivalent experience.
• Ability to work on multiple projects under the guidance of project managers, engineers, or lead designers.
• Ability to read and understand construction documents such as drawings, sketches, and 3D representations.
• Ability to solve problems using sound professional judgment, creativity, and innovation.
• Ability to retain information, details, and procedures for use on future projects.
• Working knowledge of Microsoft (MS) Office Suite, AutoCAD 2D, CADWorx, Plant 3D applications, and other relevant software such as Revit and MicroStation is a plus.
• Effective written and verbal communication skills.
• Ability to work under and meet tight deadlines.
• Punctual, dependable, detail-oriented, and thorough.
• Develop towards the ability to work independently, with minimal supervision.
• Ability to travel up to 10%.

Our Denver office is seeking a Senior Instrumentation/Controls & Electrical Engineer with experience working on Pipeline Projects (metering stations, pump stations, compressor stations) to support our Oil and Gas clients. This position will actively participate in the full project cycle, from the design phase through the final construction close-out.

Key Responsibilities:

• Lead projects from start to finish, planning personal daily work and the work of other team members.
• Apply client and departmental design guidelines and/or drafting standards in daily work assignments with guidance from senior staff. Ensure that layer names, line types, text sizes, and drawing arrangements adhere to the project standards.
• Participate in or lead squad check drawing package reviews.
• Ability to work on multiple projects simultaneously.
• Be able to read, interpret, and check vendor E&I drawings and vendor catalogs.
• Travel independently to and conduct site surveys to document electrical, instrumentation, and controls at existing client sites and facilities (less than 5% of the time).

Capabilities and Credentials:

• 8-15 years of design experience.
• Four-year engineering degree from an accredited university.
• Extensive working knowledge and understanding of the latest version of the National Electrical Code, especially hazardous location wiring practices.
• Working knowledge of industry standards: ISA, and relevant UL, API, NFPA, IEEE.
• Complete knowledge of selecting components for the design of SCADA and PLC/DCS control systems, including panel layout, architecture, configuration, sizing, and communication links (Modbus, Profibus, Ethernet, etc.).
• Proficient in performing applicable calculations and selecting instrumentation (flow, pressure, and temperature transmitters), actuators, motor-operated valves, control valves, etc.
• Proficient in interfacing with 480 V and below power electrical equipment (MCC and motor controls, transformers, ASDs, etc.) and performing calculations such as conduit fill, single-phase voltage drop, transformer sizing, feeder/conductor sizing, and panelboard and breaker sizing.
• Proficient in MS Word and Excel in creating documents from scratch.
• Proficient in wiring diagrams, electrical interconnects, panel layouts, junction box design, PLC cabinet design, plot plans, loop diagrams, I/O lists, P&IDs, cable/conduit schedules, panelboard schedules, and electrical and instrument installation details.
• Proficiency in AutoCAD (text changes, moving elements, etc.).
• Excellent interpersonal relationship skills: Ability to work with clients one-on-one (minimal supervision) on scope development and technical details.
• Good verbal and written communication skills in English.
• Excellent mentoring skills to help train less experienced designers and engineers.

Additional Experience a Plus:

• Proficient in AutoCAD for creating drawings from scratch and MS Access.
• Experience requiring leadership and self-initiated activities.
• Experience with three-phase power calculations, equipment sizing, and grounding.
• Experience with satellite and cell communications.

The selected candidate should be eligible for employment in the U.S., possess a valid driver’s license, and be prepared to pass periodic drug screening and a background check.